1. Impurities in the material make the quality CC56 CONVEYOR BELT tear

The conveyed material contains impurities, such as iron objects, wooden sticks, etc., which will cause certain damage to the belt body when it falls. In severe cases, the quality CC56 CONVEYOR BELT may be directly penetrated and stuck in the funnel, rack or pallet. On the roller, the quality CC56 CONVEYOR BELT is still running forward at high speed, and then longitudinal tearing occurs.

The material is mixed with large pieces of material, and the material is stuck between the hopper baffle and the idler, or between the idler frame and the return quality CC56 CONVEYOR BELT, scratch and press the quality CC56 CONVEYOR BELT for a long time, quality CC56 Once the surface of CONVEYOR BELT is punctured, it will become deeper and deeper, and eventually the quality CC56 CONVEYOR BELT will be cut through, causing tearing. Therefore, removing the sundries and large pieces of material before transporting the material can prevent the quality CC56 CONVEYOR BELT from tearing.

2. The belt is torn due to incorrect installation of auxiliary equipment

Except for the threat of the material itself, in the process of transportation, the falling off of the quality CC56 CONVEYOR BELT will also cause tearing, such as the plate lining of the vibrator, the hammer head of the pulverizer, etc., falling off will cause the quality CC56 CONVEYOR BELT to tear. crack.

3. Tear due to imperfect conveyor structure

The design of the conveyor is unreasonable, and the drop of the blanking point is relatively large, which will cause the material to impact the lower quality CC56 CONVEYOR BELT at a higher speed, and the quality CC56 CONVEYOR BELT will be torn by inserting the quality CC56 CONVEYOR BELT.