When the conveyor leaves the factory, the Best TC70 CONVEYOR BELT has been adjusted by the test machine, and there is generally no deviation problem during use. However, due to various reasons, the deviation of the Best TC70 CONVEYOR BELT is a common problem in use. Here is a brief analysis of its causes and troubleshooting methods:

1.Best TC70 CONVEYOR BELT is stretched and needs to be tensioned.

2. The tension on both sides of the Best TC70 CONVEYOR BELT is not leveled and needs to be re-adjusted. Note that when adjusting, you can only jog the Best TC70 CONVEYOR BELT and observe the adjustment effect in time to prevent the belt side from squeezing on the rack, damaging the belt edge and the belt being stuck. If it is really stuck, you have to loosen all the tension and manually pull it to the middle position.

3.Best TC70 CONVEYOR BELT belt card is loose or falls off and needs to be replaced.

4. The V-type idler side bracket is displaced by accidental impact and needs to be re-adjusted. If you choose a conveyor with a fixed bracket, this is not possible, but the fixed bracket cannot correct the local deviation of the Best TC70 CONVEYOR BELT.

5. The frame is seriously deformed by external impact. This failure is unlikely to occur, and once it occurs, the Best TC70 CONVEYOR BELT will require an overall re-adjustment.

6.Best TC70 CONVEYOR BELT is badly worn and needs to be replaced.