CC56 CONVEYOR BELT in china is usually used to transport some dirty materials, so after long-term use, the dirt on the material will not only affect the transportation speed, but also sometimes cause the deviation of CC56 CONVEYOR BELT in china. Therefore, after long-term use of CC56 CONVEYOR BELT in china, it should be cleaned in time to keep the CC56 CONVEYOR BELT in china clean and tidy. So how to clean up CC56 CONVEYOR BELT in china? Let a professional belt manufacturer explain it to you below.

1. First of all, before cleaning, wrap all electrical equipment that is afraid of water with plastic film to prevent the motor from being short-circuited by water.

2. Close the steam valve, observe the tensioning device, and adjust the equipment pressure.

3. Check the working condition of the washing machine and check whether the CC56 CONVEYOR BELT in china is in good condition. Damaged parts must be repaired in advance before cleaning.

4. In order to clean the CC56 CONVEYOR BELT in china better, soak the belt before cleaning.

5. Use a low-pressure spray gun to spray the well-stirred cleaning solution evenly. Be sure not to use a high pressure spray gun as this will damage the belt surface. When cleaning with a spray gun, be careful not to repeatedly clean the same location.

6. Finally rinse with clean water. Check the CC56 CONVEYOR BELT in china for stains and clean it, then dry the belt to prevent mildew.