Do you know what is the reason for the tearing of the conveyor belt? CC56 CONVEYOR BELT in china Xiaobian brings you a brief understanding.
1. Belt tearing caused by impurities in the conveying material. For coal ports, the impurities in the conveyed materials are mainly due to the poor quality of the coal. The large lumps of coal and various impurities in the raw coal, such as iron tools, wooden sticks, etc., cause about 70-80% of the tear, thus ensuring the source coal. Quality is the key to tear resistance.
2. Belt tearing caused by improper installation of conveyor auxiliary equipment. There are many auxiliary equipments on the conveyor. The falling of the liner, the sharp irons absorbed by the iron remover, and the improper installation of the cleaner may cause tearing and scratching of the conveyor belt. The ordinary conveyor belt has no lateral protection structure and cannot prevent tearing.

3. The belt is torn due to the imperfect structure of the conveyor. Due to the imperfect structure of the conveyor, the drop point of the conveyor belt is large, the relative speed of the impurities in the coal flow is large, the impact force is large, and the sharp and hard super-long impurities are easy to insert into the conveyor belt at the blanking point, causing the conveyor belt. torn.
4. Conveyor belt tearing caused by material blockage. The transfer chute is small, which is easy to hinder the passage of materials and impurities and cause the conveyor belt to tear.
5. The deviation of the conveyor belt causes the edge to be pulled.
6. Coal coils on the return trip.
The above is the CC56 CONVEYOR BELT in china editor's description: the relevant knowledge about the tearing causes of the conveyor belt.