If TC70 CONVEYOR BELT wants to have a good conveying state, it is necessary to make the belt into a loop, so its joint is an important criterion to measure whether the belt is durable, and there are many joint methods, and there are three commonly used ones: Steel buckle joints, lap joints, tooth joints.

1. The steel buckle joint is a kind of joint method that can be disassembled repeatedly. The steel buckle joint has its own advantages and disadvantages. The advantage is that it can solve the problem of inconvenient installation after the TC70 CONVEYOR BELT is formed into an endless belt.

2. The lap joint is layered by a layering machine and then polished. This joint can be selected when the machine is inconvenient to disassemble.

3. The toothed joint is the most commonly used joint in TC70 CONVEYOR BELT, and it is also a relatively strong joint. TC70 CONVEYOR BELT is layered first and then punched. Because the shape of the teeth is the same as that of the teeth, it is called a toothed joint. The toothed joint is vulcanized at high temperature by a vulcanizing machine, and the joint part after adhesion is evenly stressed, so TC70 CONVEYOR Cleaning of BELT is relatively easy.