MULTI-PLY CONVEYOR BELT damage includes these reasons
- Categories:MULTI-PLY CONVEYOR BELT
- Author:
- Origin:
- Time of issue:2022-04-08
- Views:0
(Summary description)In the long-term production and use process, it is difficult to avoid the occurrence of longitudinal tearing, cracking, or damage to the belt surface of the MULTI-PLY CONVEYOR BELT.
MULTI-PLY CONVEYOR BELT damage includes these reasons
(Summary description)In the long-term production and use process, it is difficult to avoid the occurrence of longitudinal tearing, cracking, or damage to the belt surface of the MULTI-PLY CONVEYOR BELT.
- Categories:MULTI-PLY CONVEYOR BELT
- Author:
- Origin:
- Time of issue:2022-04-08
- Views:0
In the long-term production and use process, it is difficult to avoid the occurrence of longitudinal tearing, cracking, or damage to the belt surface of the MULTI-PLY CONVEYOR BELT.
We refer to these problems as conventional damages, and they are also the most common losses encountered by people in the production process. Operators are very nervous every time they encounter these routine loss situations. If the belt is damaged, it only needs to be repaired by some vulcanization methods. If the loss is serious, the belt needs to be replaced again, and the joints should be treated with hot vulcanization. These damages will not only make operators feel very troublesome, but also bring unnecessary economic and production losses to the normal production of enterprises. Therefore, it is particularly important to avoid these injuries during use.
If we want to avoid the occurrence of these losses, we need to have a certain understanding of the causes of various injuries, so as to prevent them from happening. The main reasons for the longitudinal tearing of the MULTI-PLY CONVEYOR BELT are as follows: a very hard and water chestnut foreign body is mixed into the consignment material, which squeezes and blocks the coal drop pipe. After a serious deflection occurred during the conveying process, it was caught by the machine. The cleaner was caught in the drum, the screws were loose, and there was a harbinger of bouncing.
There are many reasons for cracks, which may be limited by the size of the working space, the MULTI-PLY CONVEYOR BELT has been bent many times, or the joint has been vulcanized for many times due to various reasons. In addition, there are many reasons for the joint to tear and cover the rubber surface to be damaged.
Scan the QR code to read on your phone
Add: Tingtou Industrial Zone, Sanhe, Tiantai, Zhejiang
Tel:
+86-576-83087811
Fax: +86-576-83087822
E-mail:
info@sjbelt.com
SEARCH
Whatever your goal, we'll get you there!