How much do you know about the maintenance tips of Wholesale CC56 CONVEYOR BELT? Let’s take a look at it briefly below!
1. Wholesale CC56 CONVEYOR BELT should be kept clean during transportation and storage, avoid direct sunlight or drenching in rain and snow, prevent contact with substances such as acid, alkali, oil, organic solvents, etc., and keep 1 meter away from the heating device.
2. During storage, the temperature in the warehouse should be kept between -18-40 degrees, and the relative humidity should be kept between 50-80%.
3. During the storage period, the product must be placed in rolls, not folded, and should be turned quarterly during the storage period.
4. Wholesale CC56 CONVEYOR BELT of different types and specifications should not be used together, and the joints should be glued.
5. The type, structure and number of layers of Wholesale CC56 CONVEYOR BELT should be reasonably selected according to the conditions of use.

6. The running speed of the conveyor belt should not be greater than 2.5 m/s. For materials with large lumps and high abrasion, a fixed force type unloading device should be used, and a low speed should be used as much as possible.
7. The relationship between the diameter of the transmission roller of the conveyor and the cloth layer of Wholesale CC56 CONVEYOR BELT, the matching of the transmission roller and the reversing roller and the requirements for the bracket angle should be reasonably selected according to the design regulations of the conveyor.
8. The feeding direction should conform to the running direction of the tape. In order to reduce the impact on the tape when the material falls, a chute should be used to reduce the falling distance of the material; The belt side should use a soft and moderate baffle plate to prevent the baffle plate from being too hard and scratching the belt surface of Wholesale CC56 CONVEYOR BELT.