Best PORTABLE VULCANIZING PRESS maintenance should pay attention to the following issues:

1. The storage environment of Best PORTABLE VULCANIZING PRESS should be dry and well ventilated to prevent electrical circuits from being wet due to humidity;

2. Do not use Best PORTABLE VULCANIZING PRESS outdoors in rainy days to prevent water from entering the electric control box and heating plate;

3. If the working environment is humid and watery, when disassembling and transferring the Best PORTABLE VULCANIZING PRESS, it should be raised with items on the ground, and do not let the Best PORTABLE VULCANIZING PRESS directly touch with water;

4. If the heating plate enters the water due to improper operation during the operation, you should first contact the manufacturer for maintenance. If emergency repairs are needed, open the cover on the heating plate, pour out the water first, then set the electric control box to manual operation, heat it to 100°C, keep it at a constant temperature for half an hour, dry the line, and put it in Belt gluing is performed manually. At the same time, the manufacturer should be contacted in time to replace the entire line.

5. If Best PORTABLE VULCANIZING PRESS does not need to be used for a long time, the heating plate should be heated every two weeks (the temperature is set at 100 ℃), and the temperature should be maintained for about half an hour.

6. After each use of Best PORTABLE VULCANIZING PRESS, the water in the hydraulic plate should be cleaned, especially in winter, if the water cannot be cleaned, it will often lead to premature aging of the rubber of the hydraulic plate, and the service life of the hydraulic plate will decrease.