The deviation of quality TC70 CONVEYOR BELT is the most common fault of belt conveyor, and its timely and accurate treatment is the guarantee of its safe and stable operation. There are many phenomena and reasons for deviation, and different adjustment methods must be adopted according to different deviation phenomena and reasons to effectively solve the problem.

The axis of the head drive pulley or the tail deflection pulley is not perpendicular to the center line of the conveyor, causing the quality TC70 CONVEYOR BELT to deviate at the head pulley or the tail deflection pulley. When the drum is skewed, the tightness of the quality TC70 CONVEYOR BELT on both sides of the drum is inconsistent, and the traction force Fq along the width direction is also inconsistent, increasing or decreasing. The moving force Fy caused the quality TC70 CONVEYOR BELT to deviate to the loose side, that is, the so-called "running loose but not tight".

The adjustment method is as follows: if the quality TC70 CONVEYOR BELT deviates to the right side of the drum, the right bearing seat should move forward, and if the quality TC70 CONVEYOR BELT deviates to the left side of the drum, the left bearing The seat should move forward, and the left bearing seat or the right bearing seat can also be moved back correspondingly. The adjustment method of the tail roller is just the opposite of that of the head roller. After repeated adjustment until the quality TC70 CONVEYOR BELT is adjusted to the ideal position. Install the exact location of the drive or redirection drum before adjusting it.