During transportation and storage, quality CFW CONVEYOR BELT should be kept clean, avoid direct sunlight or rain or snow, prevent contact with acids, alkalis, oils, organic solvents and other substances, and be one meter away from heating devices.

During storage, the warehouse temperature should be kept between 18-40°C and the relative humidity should be kept between 50-80%.

During storage, the quality CFW CONVEYOR BELT must be rolled and not folded. During storage, it should be turned every season.

Different types and specifications of quality CFW CONVEYOR BELT are not suitable for joining together, and the joints should be glued together.

The type, structure, specification and number of layers of quality CFW CONVEYOR BELT should be reasonably selected according to the conditions of use.

The running speed of the quality CFW CONVEYOR BELT should normally be no more than 2.5 m/s, materials with bulk and wear and materials using fixed discharge devices should be as low as possible.

The relationship between the diameter of the transmission roller of the conveyor and the diameter of the cloth layer of the quality CFW CONVEYOR BELT, the cooperation between the transmission roller and the reversing roller and the requirements of the idler groove angle should be reasonably selected according to the requirements of the quality CFW CONVEYOR BELT.

The feeding direction should follow the running direction of the quality CFW CONVEYOR BELT. In order to reduce the impact of the material on the quality CFW CONVEYOR BELT when the material falls, the chute should be used to reduce the distance of the material falling. The quality CFW CONVEYOR BELT receiving part should shorten the distance between the rollers and use buffer rollers as the leak point, the quality CFW CONVEYOR BELT should use soft and moderate baffles to prevent the baffles from being too hard and scratch the belt surface of the quality CFW CONVEYOR BELT .