1. Effective selection of quality TC70 CONVEYOR BELT: The selection of quality TC70 CONVEYOR BELT must take into account various factors, mainly: the relevant rules of the belt conveyor for the system quality TC70 CONVEYOR BELT; the rules of the topography and natural environment standards and the safety level; Type, shape, characteristics of raw materials to be transported, rules, larger network bandwidth, support force and transport capacity during work; minimum diameter of drum; troughing and transverse bending stiffness; load support point; curve segment and connecting segment distance; stretch Tightening method and schedule, material receiving point and material receiving standard, and its quality TC70 CONVEYOR BELT operating cycle time; impact resistance and resilience level rules, connector standards, etc.

2. Reduce the damage to the quality TC70 CONVEYOR BELT caused by the parts of the belt conveyor: the components of the belt conveyor are basically standard equipment. When ordering, choose the products of the professional manufacturer of the belt conveyor, and there are many belt conveyors in the production and production of the belt conveyor. Only manufacturers with excellent reputation can ensure the precision and quality of each component. The installation of each component shall be carried out in accordance with the current standards for the installation of transport machinery and equipment and the technical standards for project acceptance. It is very easy to cause damage to the quality TC70 CONVEYOR BELT components (such as side skirts, scrapers, various feeders, etc.) during installation to reduce damage, and pay more attention to inspection during operation.

3. Improvement of the structure of the feeding equipment: The daily task of the feeding equipment is to ensure that the raw materials are loaded on the belt conveyor. The service life of the quality TC70 CONVEYOR BELT is very large and related to the structure of the feeding equipment. The design scheme for the structure of the feeding equipment has the following rules: when loading the raw materials into the belt conveyor, the speed and orientation of the raw materials should be close to the operating speed and orientation of the quality TC70 CONVEYOR BELT; the raw materials should be loaded on the quality TC70 CONVEYOR BELT management center, Do not allow raw materials to fall outside the belt conveyor; when transporting bulk raw materials, minimize the impact of raw materials on the quality TC70 CONVEYOR BELT, and minimize the feeding aspect ratio; According to the working capacity; keep feeding continuously to ensure that the material flow on the belt conveyor continues.