>
>
>
TC70 CONVEYOR BELT Tear Prevention Method

TC70 CONVEYOR BELT Tear Prevention Method

(Summary description)Actively prevent tearing from the source. Strengthen the control of material quality and increase impurity removal equipment for impurity removal. The TC70 CONVEYOR BELT manufacturer introduced that a bulk removal device is set before the primary belt to reduce bulk materials entering the entire conveying system.

TC70 CONVEYOR BELT Tear Prevention Method

(Summary description)Actively prevent tearing from the source. Strengthen the control of material quality and increase impurity removal equipment for impurity removal. The TC70 CONVEYOR BELT manufacturer introduced that a bulk removal device is set before the primary belt to reduce bulk materials entering the entire conveying system.

Information

1. Actively prevent tearing from the source. Strengthen the control of material quality and increase impurity removal equipment for impurity removal. The TC70 CONVEYOR BELT manufacturer introduced that a bulk removal device is set before the primary belt to reduce bulk materials entering the entire conveying system. Increase the throughput of the chute. On the premise that the width of the chute is determined by the width of the belt, expand the outlet of the chute upwards to maximize its passing capacity and avoid jamming of debris or bulky materials.

TC70 CONVEYOR BELT

2. Strengthen the management of equipment. Improve the inspection and inspection of the belt, especially the management of other ancillary equipment of the belt conveyor, such as the inspection of the transfer funnel, cleaners and other facilities, to prevent sharp objects such as liners from falling off. Improve the structure of the belt itself. For example: improve the air tightness of the belt, prevent the core layer from entering the water and the steel wire rope from rusting, and require the manufacturer to strengthen the quality control and improve the quality.

3. Improve the conveyor structure. By reducing the drop of the blanking point, increasing the buffer grille, and the fine material falling before the bulk material, etc., the impact is reduced, the material speed is reduced, and the possibility of impurities inserting into the belt is reduced. Added tear detection device. When the TC70 CONVEYOR BELT is torn, it will be detected as soon as possible in a short period of time, an alarm will be issued and the machine will be stopped to minimize the tearing length and reduce losses.

Keyword:

Scan the QR code to read on your phone

CONTACT

 

Add: Tingtou Industrial Zone, Sanhe, Tiantai, Zhejiang

Tel:  +86-576-83087811
Fax: +86-576-83087822
E-mail: 
info@sjbelt.com

SEARCH

SEARCH
SEARCH

Whatever your goal, we'll get you there!