>
>
>
TC70 CONVEYOR BELT in transportation and storage

TC70 CONVEYOR BELT in transportation and storage

  • Categories:CONVEYOR BELT
  • Author:
  • Origin:
  • Time of issue:2022-03-09
  • Views:0

(Summary description)The TC70 CONVEYOR BELT should be kept clean during transportation and storage, and should not be exposed to direct sunlight or rain or snow, and should not be in contact with acids, alkalis, oils, organic solvents, etc., and should be kept one meter away from the heating device.

TC70 CONVEYOR BELT in transportation and storage

(Summary description)The TC70 CONVEYOR BELT should be kept clean during transportation and storage, and should not be exposed to direct sunlight or rain or snow, and should not be in contact with acids, alkalis, oils, organic solvents, etc., and should be kept one meter away from the heating device.

  • Categories:CONVEYOR BELT
  • Author:
  • Origin:
  • Time of issue:2022-03-09
  • Views:0
Information

1. The TC70 CONVEYOR BELT should be kept clean during transportation and storage, and should not be exposed to direct sunlight or rain or snow, and should not be in contact with acids, alkalis, oils, organic solvents, etc., and should be kept one meter away from the heating device.

TC70 CONVEYOR BELT

2. During storage, the temperature of the warehouse should be kept between 18-40 ℃, and the relative humidity should be kept between 50-80%.

3. During the storage period, the product should be placed in rolls, not folded, and should be turned over once a quarter during the storage period.

4. Conveyor belts of different types and specifications should not be used together, and their joints should be glued as much as possible.

5. The type, structure, specification and number of layers of the conveyor belt should be reasonably selected according to the conditions of use.

6. The running speed of the TC70 CONVEYOR BELT should not generally be greater than 2.5 m/s, and the materials with large lumps and high abrasion and the unloading device using fixed pears should use low speed as much as possible.

7. The relationship between the diameter of the transmission roller of the conveyor and the cloth layer of the conveyor belt, the matching of the transmission roller and the reversing roller, and the requirements for the groove angle of the idler should be reasonably selected according to the design regulations of the conveyor.

8. The feeding direction should follow the running direction of the conveyor belt. In order to reduce the impact on the belt when the material falls, a chute should be used to reduce the falling distance of the material; the belt receiving section should shorten the distance between the rollers and use a buffer roller for leakage. , The belt should adopt a soft and moderate baffle plate, so as to avoid the baffle plate being too hard and scratching the belt surface of the TC70 CONVEYOR BELT.

9. The following items should be paid attention to when using the TC70 CONVEYOR BELT:

(1) Avoid the idler being covered by the material, resulting in ineffective rotation, and do not let the leakage material get stuck between the roller and the belt, pay attention to the lubrication of the moving parts, but do not contaminate the conveyor belt with oil;

(2) Avoid starting with load;

(3) If the tape deviates, take measures to correct it during application;

(4) When local damage to the TC70 CONVEYOR BELT tape is found, it should be repaired in time to avoid expansion.

Keyword:

Scan the QR code to read on your phone

CONTACT

 

Add: Tingtou Industrial Zone, Sanhe, Tiantai, Zhejiang

Tel:  +86-576-83087811
Fax: +86-576-83087822
E-mail: 
info@sjbelt.com

SEARCH

SEARCH
SEARCH

Whatever your goal, we'll get you there!