Things to pay attention to when installing a TC70 CONVEYOR BELT
- Categories:Industry news
- Author:
- Origin:
- Time of issue:2022-03-02
- Views:0
(Summary description)The TC70 CONVEYOR BELT manufacturer stated that a movable shaft that can rotate flexibly can be installed on the transformer coil of the TC70 CONVEYOR BELT reel, and the reel can be placed on it.
Things to pay attention to when installing a TC70 CONVEYOR BELT
(Summary description)The TC70 CONVEYOR BELT manufacturer stated that a movable shaft that can rotate flexibly can be installed on the transformer coil of the TC70 CONVEYOR BELT reel, and the reel can be placed on it.
- Categories:Industry news
- Author:
- Origin:
- Time of issue:2022-03-02
- Views:0
The TC70 CONVEYOR BELT manufacturer stated that a movable shaft that can rotate flexibly can be installed on the transformer coil of the TC70 CONVEYOR BELT reel, and the reel can be placed on it.
Attention should be paid to the opening and falling of the TC70 CONVEYOR BELT, and no lifts should be placed. For the relevant working level of the transporter, it can be sealed at various points of the old transporter. For the transporter working in a skewed direction, the sealing point should be selected to avoid failure due to reduction of net weight. The traction rope avoids extrusion processing, the adjusted position of the new belt conveyor, one side of the tape is a fixed fixture, and then the rope and the roller and the frame, when pulling the rope, the large inclination angle between the TC70 CONVEYOR BELT and the frame should also be avoided. .
Then it is fixed with a clamp. One side of the TC70 CONVEYOR BELT is fixed on the transport frame with a clamp, the other end is passed through the pulley block, and the other end is fastened until there is no more slack on the buffer roller.
Scan the QR code to read on your phone
Add: Tingtou Industrial Zone, Sanhe, Tiantai, Zhejiang
Tel:
+86-576-83087811
Fax: +86-576-83087822
E-mail:
info@sjbelt.com
SEARCH
Whatever your goal, we'll get you there!