The repair method of TC70 CONVEYOR BELT products is determined according to the damage of TC70 CONVEYOR BELT products. E.g:

1. Minor wear and tear: The manufacturer of TC70 CONVEYOR BELT products introduced that cold vulcanized rubber can be used to repair and fill, and the mixed rubber repair agent is applied to the damaged part and smoothed.

2. Severe tearing or breaking: This kind of serious damage needs to be re-joined, and most of them will use a hot vulcanization process to ensure the bonding strength of the joint.

3. Scratches and tears: Use repair strips with cold vulcanized adhesives to repair. Apply cold vulcanized glue to the damaged parts after grinding and cleaning, then attach the repair strips, and use a compaction roller wheel and a rubber hammer to roll out the air firmly.

In addition to the correct construction process, the repair materials should also meet the needs of use. The conveyor will generate a very large tensile force at the moment of starting, so the repair materials must have sufficient adhesion and tensile strength. The impact of the material, TC70 CONVEYOR BELT products Vibration and frequent flexing require that the glue must have sufficient flexibility and flex resistance to ensure that the adhesive surface of the glue can still maintain a good bonding effect under complex and high-strength forces.