Local hot vulcanization; that is, CC56 CONVEYOR BELT products hot fluidization needs to be equipped with a vulcanizer. For local cold bonding, use repair strips (longitudinal cracks), cold glue-T2 composite glue to fill the cracks vertically (special glue gun is required). The advantages of these two methods are that there is less human and material investment, better wear resistance and reinforcement performance, and shorter recovery time.

CC56 CONVEYOR BELT products spray repair technology. The technology is to mix several liquid materials through special equipment, spray them on the wear surface of the belt under high pressure, and spray a certain thickness of wear-resistant layer as needed. The curing time is short, and it is suitable for local wear in continuous pieces. The effect is very good. The disadvantage is that special equipment is required.

Improved CC56 CONVEYOR BELT products drop hopper. The improvement of CC56 CONVEYOR BELT products drop hopper is one of the effective measures to prevent early damage of CC56 CONVEYOR BELT products. Improve the drop hopper at the transition of each belt conveyor to increase its ability to pass foreign objects by 2.5 times. Long and large foreign objects are not easy to get stuck between the funnel wall and CC56 CONVEYOR BELT products during the conveying process, reducing foreign body tearing CC56 Probability of CONVEYOR BELT products.

The guide skirt at the drop hopper makes the gap between the CC56 CONVEYOR BELT products and the CC56 CONVEYOR BELT products larger and larger along the running direction of the CC56 CONVEYOR BELT products, to solve the problem of coal and stone stuck between the CC56 CONVEYOR BELT products and the skirt plate, Eliminate the resulting damage to CC56 CONVEYOR BELT products. The hopper with a large drop is equipped with a buffer baffle to prevent the material from directly impacting the CC56 CONVEYOR BELT products.