1. The thinning of the TC70 CONVEYOR BELT makes it inconvenient to overlap the conveyor belt, making its thickness thinner. When the two ends are overlapped, the thickness of the joint is different, and the joint position and the idler have strong scraping during operation. Wear the idler, and shorten the life of the joint, especially the new belt and the old belt are more convex. For TC70 CONVEYOR BELT connected by vulcanization, the lap joint is more difficult because of different thicknesses.

2. The strength of the TC70 CONVEYOR BELT decreases. The high temperature resistant conveyor belt is made of multi-layer rubber cotton canvas (polyester cotton cloth) or polyester canvas covered with high temperature resistant or heat resistant rubber and bonded together by high temperature vulcanization. It is suitable for conveying hot coke, cement, slag and Hot castings, etc. The damage of the conveyor belt reaches a certain level, especially when the cover layer is damaged and reaches the core layer, which directly affects the tensile strength of the conveyor belt and reduces its strength. When the steel rope core TC70 CONVEYOR BELT damages the core layer, it may cause the core to rust and lose its due strength. During the operation of the conveyor belt with poor strength, when the load suddenly increases, such as when the car starts with a load and the cassette, etc., it is very easy to cause the conveyor belt to break.

3. The TC70 CONVEYOR BELT deviates. When the damage levels on both sides along the center line of the conveyor belt are different, the stretch rate on both sides often changes, which directly causes the conveyor belt to deviate during operation.