>
>
>
What are the reasons for the deviation of the TC70 CONVEYOR BELT?

What are the reasons for the deviation of the TC70 CONVEYOR BELT?

  • Categories:CONVEYOR BELT
  • Author:
  • Origin:
  • Time of issue:2022-03-15
  • Views:0

(Summary description)During the operation of the belt conveyor, the center line of the TC70 CONVEYOR BELT deviates from the center line of the conveyor and deviates to one side.

What are the reasons for the deviation of the TC70 CONVEYOR BELT?

(Summary description)During the operation of the belt conveyor, the center line of the TC70 CONVEYOR BELT deviates from the center line of the conveyor and deviates to one side.

  • Categories:CONVEYOR BELT
  • Author:
  • Origin:
  • Time of issue:2022-03-15
  • Views:0
Information

During the operation of the belt conveyor, the center line of the TC70 CONVEYOR BELT deviates from the center line of the conveyor and deviates to one side. This phenomenon is the deviation of the conveyor belt. Shenyang conveyor belt tells you that deviation is one of the common failure phenomena of belt conveyors. Long-term deviation operation not only causes serious wear and tear on the edge of the belt.

TC70 CONVEYOR BELT

When feeding the belt conveyor, the material on the cross section of the TC70 CONVEYOR BELT is not centered and is biased to one side, so that the force on both sides of the conveyor belt is uneven and the conveyor belt is deviated. The uneven distribution of ore material is mainly caused by the incorrect falling direction and position of the ore material. If the ore material deviates to the left, the conveyor belt will deviate to the right; and vice versa.

The TC70 CONVEYOR BELT itself has uneven force on both sides of the core layer, especially the steel rope core conveyor belt.

When conveying viscous and difficult-to-clean materials, the deflecting roller and the lower branch idler stick to the material, causing the conveyor belt to deviate.

When the TC70 CONVEYOR BELT is running normally, the belt speed shall not be lower than 95% of the roller speed. If the friction between the roller and the conveyor belt is not enough, the conveyor belt will easily show the phenomenon of slipping. There are many reasons for the insufficient friction between the driving roller and the conveyor belt. The common ones are: insufficient tension, starting to work under load, and insufficient friction coefficient on the surface of the roller.

Keyword:

Scan the QR code to read on your phone

CONTACT

 

Add: Tingtou Industrial Zone, Sanhe, Tiantai, Zhejiang

Tel: +86-576-83087811
Fax: +86-576-83087822
E-mail: 
info@sjbelt.com

SEARCH

SEARCH
SEARCH

Whatever your goal, we'll get you there!