CFW CONVEYOR BELT will inevitably come into contact with water during use, so will CFW CONVEYOR BELT be impressed with its use effect and performance after being exposed to a large amount of water? The following CFW CONVEYOR BELT manufacturers will give you a detailed understanding.

CFW CONVEYOR BELT In the underground mining industry, the low creep elongation of the CFW CONVEYOR BELT frame material is very important. Due to the limitation of underground space, there is no large-scale tensioning device. For the power belt running at high speed, the temperature of the belt body is easy to rise. Therefore, it is particularly important to maintain sufficient tension under high temperature.

CFW CONVEYOR BELT is usually used outdoors, so the moisture in the outdoor environment also has a serious impact on the creep elongation of the skeleton material: the standard retrospective rate of cotton fiber is 4.5%, cotton yarn is 8%, and polyester is only 0.3% %. After the skeleton material absorbs water, the water becomes a plasticizer, which can make the material easier to stretch and reduce the modulus. The elongation at break increases. Obviously, materials with low water absorption are relatively more stable. Water absorption will also cause the bonding interface between the rubber and the skeleton material, as well as the bonding interface strength between the RFL resin layer impregnated by the skeleton material and the fiber, resulting in a decrease in the peel strength between the layers, which affects the service life of CFW CONVEYOR BELT.