Under normal circumstances, the parallelism of the lower china TC70 CONVEYOR BELT and the insufficient height of the traction roller will cause the lower side of the china TC70 CONVEYOR BELT to shift. Bottom closed, top normal. This situation is basically caused by the incomplete cleaning device, the lower rollers being stuck with material, the counterweight support rollers being unfair or the counterweight support being inclined, and the lower rollers being against each other. As the practice is unfair, the specific situation needs to be adjusted according to the actual situation.

Generally, the deviation of the lower side can be corrected. This problem can be corrected by improving the working state of the entire cleaning unit, removing material from the rollers, adjusting the lower flat roller, lower V-shaped roller or installing the lower side self-aligning roller. Correct it.

The deviation adjustment roller is an automatic centering roller installed on the china TC70 CONVEYOR BELT, which can automatically correct the deviation of the tape. As the tape deflects and rubs on the aligned small stop rollers, the side brackets move forward in the direction the tape runs and the tape moves to the other side until it returns to its normal position.

It should be noted that when adjusting the deviation of the china TC70 CONVEYOR BELT, do not be in a hurry. In the process of fine-tuning, adjust slowly and observe carefully until you are satisfied.