What are the causes of the side ditch of the TC70 CONVEYOR BELT? The following skilled personnel will introduce it to you. I hope our introduction may help you better.

The TC70 CONVEYOR BELT plays the role of carrying the conveyed material on the conveyor. It is the key equipment on the conveying equipment that is most directly in contact with the conveyed material. Once the conveyor belt has problems, it will directly affect the operation of the conveyor. Impression of abnormal production and life. A common problem with conveyor belts. There are many problems in the use of conveyor belt side grooves. For example, conveyor belts have side grooves, which is a very common problem. The high temperature resistant conveyor belt is made of multi-layer rubber cotton canvas (polyester cotton cloth) or polyester canvas covered with high temperature resistant or heat resistant rubber and bonded together by high temperature vulcanization. It is suitable for conveying hot coke, cement, slag and Hot castings, etc. This has a major impact on conveyor belt issues. There are two problems in the gutter problem, one is the formula; the other is the process.

Formula: It refers to the formula of the edge glue, its fluidity is not good, and it cannot achieve co-vulcanization with the sticker and cover glue. The high temperature resistant conveyor belt is made of multi-layer rubber cotton canvas (polyester cotton cloth) or polyester canvas covered with high temperature resistant or heat resistant rubber and bonded together by high temperature vulcanization. It is suitable for conveying hot coke, cement, slag and Hot castings, etc.

Process: refers to the forming process of the TC70 CONVEYOR BELT blank, the side of the blank is untidy, the upper edge glue process is not done as required, and there is a gap between the edge glue and the blank, resulting in the above problems