>
>
>
Common causes of TC70 CONVEYOR BELT breakage

Common causes of TC70 CONVEYOR BELT breakage

  • Categories:CONVEYOR BELT
  • Author:
  • Origin:
  • Time of issue:2022-03-11
  • Views:0

(Summary description)During the use of the TC70 CONVEYOR BELT, there are many factors that can cause the conveyor belt to be damaged.

Common causes of TC70 CONVEYOR BELT breakage

(Summary description)During the use of the TC70 CONVEYOR BELT, there are many factors that can cause the conveyor belt to be damaged.

  • Categories:CONVEYOR BELT
  • Author:
  • Origin:
  • Time of issue:2022-03-11
  • Views:0
Information

During the use of the TC70 CONVEYOR BELT, there are many factors that can cause the conveyor belt to be damaged. Although it can be repaired after damage, it will still affect the service life of the conveyor belt. Therefore, it is necessary to avoid damage to the conveyor belt during use. The following conveyor belt manufacturers will take you to learn more about the common influencing factors of conveyor belt damage.

TC70 CONVEYOR BELT

The TC70 CONVEYOR BELT will be damaged to varying degrees during use. The tape editor will introduce to you the reasons for the damage to the conveyor belt. Conveyor belt manufacturers must be connected in a ring before use, so the quality of the conveyor belt joint directly affects the service life of the conveyor belt and whether the conveyor line can run smoothly and smoothly. Common methods of conveyor belt joints include mechanical joints, cold bonding joints, hot vulcanization joints, etc.

The causes of TC70 CONVEYOR BELT damage can be summed up in several aspects, such as manufacturing quality, design and use, use and maintenance, and transportation and storage management. Conveyor belt manufacturers must be connected in a ring before use, so the quality of the conveyor belt joint directly affects the service life of the conveyor belt and whether the conveyor line can run smoothly and smoothly. Common methods of conveyor belt joints include mechanical joints, cold bonding joints, hot vulcanization joints, etc.

So what should we pay attention to! To prevent the TC70 CONVEYOR BELT from starting under load; if the conveyor belt deviates, we should take timely measures (pointing to the solution to the problem) to correct it; when the conveyor belt is found to be partially damaged, use artificial cotton to repair it in time to avoid expansion. Prevent the conveyor belt from being blocked by the frame, pillars or block materials, and prevent it from being broken and torn.

Keyword:

Scan the QR code to read on your phone

CONTACT

 

Add: Tingtou Industrial Zone, Sanhe, Tiantai, Zhejiang

Tel: +86-576-83087811
Fax: +86-576-83087822
E-mail: 
info@sjbelt.com

SEARCH

SEARCH
SEARCH

Whatever your goal, we'll get you there!